Removing and replacing the server cover
Remove the server cover if you need to service the interior of the server.
To remove the server cover
Step
1
2
3
4
Copyright © 2007, Nortel Networks
.
Action
DANGER
Risk of electric shock
High current inside the chassis can cause severe injury.
CAUTION
Risk of equipment damage
Take precautions to protect internal components. Electrostatic
discharge (ESD) can damage boards and make them unusable.
Power down the server, unplug all peripheral devices and Ethernet
cables, and disconnect the AC power.
Attach the ESD strap to your wrist and attach the other end to a
known grounded connection.
While holding in the blue button at the top of the chassis, slide the
top cover back until it stops.
Figure 18
Server cover
Lift the cover straight up to remove it from the platform.
Nortel CallPilot
600r Server Maintenance and Diagnostics
NN44200-703 01.04 Standard
5.0 25 April 2007
Removing and replacing the server cover 77