Removing The Side Cover - Nortel CallPilot 702t Installation And Configuration Manual

October 2002

Removing the side cover

To remove the side cover
1 If a padlock is installed on the back of the system, unlock and remove it.
See "A" in the diagram below:
A
B
2 Remove and save the three screws from the back of the side cover. See
"B" in the diagram above.
Note: You need the screws to reattach the side cover.
Part 5: 702t Server Maintenance and Diagnostics
Bottom
tabs of
cover
Bottom
slots of
chassis
Replacing basic chassis components
C
G100825
117