Creating Analog Telephone Models; Modifying Analog Model Telephones - Nortel Meridian 1 Planning And Installation Manual

Page 562 of 590

Creating analog telephone models

Modifying analog model telephones

553-3021-209 Standard 1.00
Appendix E – Changing preprogrammed data
You must enter the following information in LD 10 to create an analog
(500/2500- type) telephone model:
LD 10
REQ NEW
TYPE 500 M
MODL YYY "YYY" = the model number of the
Enter responses to the remaining prompts to complete the new model. (Refer
to the Option 11 Software guides for a complete list of prompts and possible
responses).
If you want to modify an analog telephone, use LD 10 and enter the following
commands on the TTY:
LD 10
REQ CHG
TYPE 500 M
MODL YYY "YYY" = the model number of the telephone that you are
modifying
For more information about LD 10 and its associated prompts and
commands, refer to the Option 11C Software Guides that are shipped with the
system.
July 1999
telephone that you are creating