Nortel Meridian 1 Planning And Installation Manual page 247

Chapter 12 — Installing the circuit cards
Figure 48
Italy
Characteristic
Frequency Band
Minimum Detect Level
Minimum Validation Time
Break Tolerance
Cadence Type
Minimum Acceptance Level
Figure 49
Norway
Tone Characteristic
Frequency Band
Minimum Detect Level
see note 2
Minimum Validation Time
Break Tolerance
Cadence Type
Second Stage Configuration
Maximum reject level
Minimum Acceptance Level
Note: Second Stage Configuration allows the definition of second stage
dial tone. Second stage dial tone detection is not normally required in
CIS, Denmark, Italy or Norway.
Self-test
When the NT5K48 trunk card is installed and power is applied to it, a self-test
is performed on the card. The red LED on the faceplate flashes three times,
then remains continuously lit until the card is enabled in software. If the
self-test fails, the LED remains lit.
Mnemonic in
Overlay 97
DFQ
MDL
MVT
BRK
CAD
MINL
Mnemonic in
Overlay 97
DFQ
MDL
MVT
BRK
CAD
SSC
MINL
Option 11C Mini Planning and Installation Guide
Page 227 of 590
Setting
4
-28 dBm
600 ms
000 ms
00
-30 dBm
Setting
1
-32 dBm0
1400 mS
000 mS
00
See Note
-40 dBm
-30 dBm