Chapter 13 - Installing And Connecting The Cross-Connect Terminal - Nortel Meridian 1 Planning And Installation Manual

Chapter 13 — Installing and connecting
the cross-connect terminal
This chapter describes how to install and connect an Option 11C Mini system
using one of the following cross-connect terminals:
• BIX cross-connect terminal
• Reichle Masari cross-connect terminal (Germany)
• Krone Test Jack Frame (UK)
Note: The use of the BIX system is not mandatory; however, the BIX
system is the recommended option.
You can find information about the BIX cross-connect system in the
following documents:
• BIX In-Building Cross-Connect System Material Description
(631-4511-100)
• BIX In-Building Cross-Connect System Material Installation and
Servicing (631-4511-200)
For information about 1.5 Mbit and 2.0 Mbit DTI/PRI-related wiring and
cables, refer to the following documents:
• Option 11C 1.5Mbit DTI/PRI Administration and Maintenance Guide
(553-3011-310)
• Option 11C 2.0Mbit DTI/PRI Administration and Maintenance Guide
(553-3011-315).
Option 11C Mini Planning and Installation Guide
Page 229 of 590