Installation procedures
Unpacking or packing a modular telephone
Use proper care while unpacking Meridian modular telephones. Check for
damaged containers so that appropriate claims can be made to the transport
company for items damaged in transit.
If a telephone must be returned to the factory, ensure that the telephone is
packed in the appropriate container to avoid damage during transit.
Remember to include all loose parts in the shipment, such as cords, the
handset, the power unit, labels, and lenses.
Meridian modular telephone installation
The step-by-step routine in Procedure 2-1 details the installation procedures
for any Meridian modular (M2000 series) telephone.
Procedure 2-1
Installing a Meridian modular telephone
1
2
3
4
Meridian SuperNode MSL-100 Meridian Modular Telephones Reference Manual MSL11
Place telephone upside down on several sheets of soft, clean paper on a solid,
level work surface to prevent damage to movable keys and telephone face
plate.
Connect the handset cord 4-conductor TELADAPT connectors to the handset
and to the telephone.
Response:
The TELADAPT connectors have a latch-tab to ensure correct alignment and
prevent the cord from being pulled out inadvertently during service.
Ensure that this latch-tab is firmly snapped in place.
After connecting the handset cord to the connector in the base of the telephone,
turn the smooth side of the handset cord up (away from telephone base) before
tucking it under the restraining tab.
Response:
This ensures that the telephone sits level on the desk after installation is
complete. See Figure 2-1.
2-1