Creating, Changing, And Removing Model Telephones - Nortel Meridian 1 Planning And Installation Manual

Creating, changing, and removing model telephones

Appendix E – Changing preprogrammed data
To remove all access codes, enter the following commands:
REQ OUT
TYPE FFC
CUST 0-31
FFCT YES,(NO)
ALL YES
CODE<CR>
REQ END
If you need a model telephone different from the default models provided in
Option 11C Mini software, use overlays to design the models. Use the
information in Table 96.
Table 96
Design model telephones
Task
Create model telephones:
Analog telephones
(500/2500 type telephones)
Digital telephones
Get information about model telephones
If you require additional help when creating model telephones and
trunks, refer to the Option 11C Software guides.
Action request
FFC = Flexible feature codes
Customer Number
FFC Confirmation tone
Remove all access codes
Return to REQ
End program
Option 11C Mini Planning and Installation Guide
Page 561 of 590
Overlay
LD 10
LD 11
LD 20
(printout)