Nortel Meridian 1 Planning And Installation Manual page 44

Page 24 of 590 Chapter 2 — Identifying the Option 11C Mini equipment
Table 3
Comparison of Option 11C Mini and Option 11C (Continued)
Item
Daughterboards
Software
Software
Installation
Software upgrades
IPE and CE cards
553-3021-209 Standard 1.00
Option 11C Mini
• C: drive on NTDK97 is 8
Mbytes
• Z: drive on NTDK97 is 1.5
Mbytes
• NTDK97 program store is
32 Mbytes
• DRAM on NTDK97 is 16
Mbytes
None
X11 Release 24B and later
Software is preprogrammed on
MSC card.
Option 11C Mini uses the same
feature sets, ISM parameters, and
keycode format as the Option 11C.
Software upgrades are performed
using the same PCMCIA card as
the Option 11C.
The Option 11C Mini supports the
same IPE and CE cards as the
Option 11C
The supported CE cards are: PRI,
DTI, PRI2, DTI2, SDI/DCH,
TDS/DTR, MISP
Only slots 1-3 in the Main Chassis
support CE cards.
July 1999
Option 11C
• C: drive on
NTDK21/NTDK81 is 8
Mbytes
• Z: drive on NTDK20 is 1.5
Mbytes
• NTDK21 program store is
24 Mbytes
• NTDK81 program store is
32 Mbytes
• DRAM - 8 or 16 Mbytes
SIMM
• NTDK21/NTDK81
Software Daughterboard
• NTDK22, NTDK24,
NTDK79, NTDK84, and
NTDK85, Fiber-optic
Expansion Daughterboards
X11 Release 22 and later
Software is preprogrammed on
Software Daughterboard.
Software upgrades are performed
using a PCMCIA card.
Only slots 1-9 in the Main Cabinet
support CE cards.