Activating Telephones - Nortel Meridian 1 Planning And Installation Manual

Hide thumbs Also See for Meridian 1:

Table of Contents

Page 416 of 590

Activating telephones

Telephone tones

Sequences of three short

beeps with a pause

between cycles

Special dial

Six short beeps followed

by continuous tone

Overflow tone

Continuous beeping, like

Short, high pitched beep

followed by silence

553-3021-209

Standard 1.00

Appendix B – Additional information for installations in Germany

To activate a telephone, you must first decide which default model to assign

to that telephone.

This section describes how to activate the following telephones:

a default model with default extension number

a customized model with a customized extension number

Telephone tones

There are a number of different telephone tones. The list of tones in Table 77

includes tones that you hear during telephone activation

Note: Before you activate a telephone, make sure you decide on its final

location. Also, make sure you know the model number assigned to the

telephone and if it must be customized.

Specification

Pause between beeps:

Pause between cycles:

Pause between beeps:

Beep: 1400 Hz tone for 1.4

420 Hz tone for 200 ms

420 Hz tone for 125 ms

420 Hz tone for 200 ms

Option 11c mini