Connecting Analog (500/2500-Type) Telephones With A Pftu - Nortel Meridian 1 Planning And Installation Manual
Hide thumbs
Also See for Meridian 1:
- Manual (1121 pages) ,
- Planning, installation and operating instructions (556 pages) ,
- Administration and maintenance (507 pages)
Table of Contents
Advertisement
Connecting analog (500/2500-type) telephones with a PFTU
Chapter 17 — Connecting the telephones
5
For installation in Germany, attach a BZT approval label to the
bottom of the telephone. Refer to "Appendix B – Additional
information for installations in Germany" on page 411 for a listing
of BZT approval labels.
—————————— End of Procedure ——————————
Procedure 65
Connecting 500/2500-type telephones with a PFTU
1
Locate the telephone terminations on the cross-connect terminal.
2
Connect one end of the cross-connect wire to the leads of the
telephone.
3
Locate the PFTU connections (unit PFT 1 through PFT 5)
assigned to this telephone at the cross-connect terminal.
Refer to Table 42 on page 299.
4
Connect the other end of the cross-connect wire to the pair
assigned to the telephone on the PFTU.
5
Connect a second cross-connect wire to the pair assigned to the
line card on the PFTU.
6
Locate the line card terminations on the cross-connect terminal.
Refer to Table 41 on page 299.
7
Connect the other end of the cross-connect wire to the assigned
TN terminal block.
Table 44 on page 302 provides the default DN assignments.
8
For installations in Germany, attach a BZT approval label to the
bottom of the telephone. Refer to "Appendix B – Additional
information for installations in Germany" on page 411 for a listing
of BZT approval labels.
Now, you can activate the telephone, as described on page 303.
—————————— End of Procedure ——————————
Option 11C Mini
Planning and Installation Guide
Page 293 of 590
Advertisement
Table of Contents
