Nortel Meridian 1 Planning And Installation Manual page 117

Figure 23
Chassis bracket installed on the back of the chassis
4
5
Tabs
Lift the chassis into place so that the slot on the chassis bracket
engages the hook feature on the wall bracket.
Carefully lower the chassis until the hook on the wall bracket fits
securely into the slot on the chassis bracket.
Fasten the chassis in position.
Fasten the tabs, that extend past the bottom of the chassis, to the
plywood backboard. Use the two remaining #12 wood screws from the
bracket kit to fasten the tabs to the backboard. See Figure 24.
Chapter 9 — Installing the chassis
Slot feature
Hook feature on
wall bracket fits
into this slot.
Option 11C Mini
Page 97 of 590
Planning and Installation Guide