Nt5K96Ta/Nt5K02Ta Flexible Analog Line Card - Nortel Meridian 1 Planning And Installation Manual

NT5K96TA/NT5K02TA Flexible analog line card

The NT5K02TA line card is available with message waiting, while the
NT5K96TA line card is equipped without message waiting.
Switch settings
There are no option switches on this card. Configure all settings in software.
Procedure 35
NT5K96TA / NT5K02TA Flexible analog line card installation
1 Insert the NT5K96TA or NT5K02TA card in its allocated card slot.
2 Connect the line card units to the cross-connect terminal and
telephone by tip and ring leads.
3 Configure the telephone lines in software (LD 10).
—————————— End of Procedure ——————————
Self-test
The faceplate of the NT5K96TA / NT5K02TA has a red LED. The LED
lights when all of the assigned units on the circuit card are disabled.
Chapter 12 — Installing the circuit cards
Option 11C Mini
Page 173 of 590
Planning and Installation Guide