Nortel Meridian 1 Planning And Installation Manual page 261

Page 240 of 590
Figure 54
Cable connectors on the back of the Main Chassis
553-3021-209 Standard 1.00
Chapter 13 — Installing and connecting the cross-connect terminal
Connector
for slot 03
Connector
for slot 02
Connector
for slot 01
3 Tighten the velcro straps when you have connected each cable to
the chassis.
4
For systems required to meet CISPR-B Electromagnetic Compatibility
(EMC), perform the following step. On each installed 25-pair cable,
attach the supplied ferrite filter to the cable. Attach the ferrite filter as
near the connector as possible (see Figure 55). To attach the ferrite
filter, press the cable firmly into the groove on one side of the open
filter. Close the filter around the cable and press the filter together
using the fastening clip snaps close.
July 1999
Connector for
slot 05 and half
of slot 06
Connector for
slot 04 and half
of slot 06