Nortel Meridian 1 Planning And Installation Manual page 93

Chapter 6 — Getting started installing the Option 11C Mini
5 Locate the carton containing the Main Chassis and the Chassis Expander
that you will install at this site.
6 Install the Main Chassis. See "Chapter 9 — Installing the chassis" on
page 93.
7 Install the Chassis Expander. See "Chapter 10 — Connecting the Chassis
Expander to the Main Chassis" on page 113. You can skip this step if
your system only has one chassis.
8 Install the chassis ground wire for the Main Chassis and Chassis
Expander at this site. See "Chapter 11 – Installing the system ground" on
page 117.
9 If you require a UPS, install the UPS according to manufacturer's
instructions.
10 If you have not already done so, remove the faceplate of the chassis.
a Loosen the quick-release screws on the faceplate of the chassis. See
Figure 14.
b Lift the faceplate up.
c Remove the faceplate.
Option 11C Mini Planning and Installation Guide
Page 73 of 590