Feature Set And Ism Parameters; Security Device; Aux Id; Customer Database - Nortel Meridian 1 Planning And Installation Manual

Page 274 of 590
Chapter 16 — Starting the Option 11C Mini and installing software

Feature set and ISM parameters

The Software Installation Program allows the selection of a feature set to be
installed and enabled on the Option 11C Mini system. A feature set, such as
Enhanced Business or Networking Services, has an associated list of software
packages and ISM parameters. The Software Delivery Card can include
several preconfigured feature sets.
The Software Installation Program also allows the addition of individual
packages from the feature set and the changing of ISM system parameters.
Additions and changes are keycode controlled; therefore, the packages and
ISM parameters must match those corresponding to the site's keycodes.

Security Device

A Security Device is provided with each new Option 11C Mini system.
Attach this device to the component side of the NTDK97 MSC card at the
time of initial installation. The Security Device remains there for the life of
the system.

AUX ID

Enter the AUX ID using the Software Installation Program. For new Option
11C Mini sites, the AUX ID is the system security ID. When assigned, the
AUX ID remains for the life of the system.

Customer database

The Software Installation Program allows the installation of a customer
database from one of the following sources:
Preconfigured database
The Software Delivery card can include several preconfigured databases and
their associated feature sets. In addition, a minimal database is provided
which contains basic system configuration information with no customer
data.
553-3021-209 Standard 1.00
Note: The Software Installation Program does not check the
prerequisites and interactions of added packages.
July 1999