Pad Tables - Nortel Meridian 1 Planning And Installation Manual

Page 396 of 590

Pad tables

553-3021-209 Standard 1.00
Appendix A – General information for the United Kingdom
Outgoing calls
Prompt
SEZ (S)
SEZA (R)
CONN (S)
CONN (R)
CLRB (R)
CLRF (S)
Pulse sending
Configure pulse sending as follows:
Prompt
FEAT
DDIGT (S)
To implement the UK loss plan described earlier in this chapter, define the
following pad tables for all digital trunks that use CAS or Q.931 signaling.
DASS-2 and DPNSS trunks are automatically set to the correct values. As a
result, you do not need to configure them here.
July 1999
Response Description
0101 Seize for voice or data calls to a
non-SL-1
1101 Seize acknowledgment
0101 Connect
0101 Connect
0001 or 1101 Clear back
(depends on
location,
whether a
disconnect
clear signal is
offered by the
public
exchange)
1101 Clear forward
Response Description
LPTI Feature
PXXX (or "N" if
using DTMF
signaling)