Installation; To Install The M3900 Series Meridian Digital Telephones; To Install The Acm - Nortel M3900 Series Description, Installation And Operation

Installation

To install the M3900 Series Meridian Digital Telephones:

To install the ACM:

1
Complete the wiring and cross-connections (loop power).
2
Connect the telephone to the connecting block.
3
Place the telephone upright on the desk in the normal operating position.
4 Perform the self test and acceptance procedures found in the Telephone
and attendant console installation (553-3001-215).
5
Supply the user with a quick reference guide.
Please refer to Figure 6 on page 30.
1 Slide the footstand down (using the plastic hinges) about a quarter of and
pull the footstand away from the telephone base.
2 Snap the ACM into the rectangular opening on the back of the telephone.
3 Connect the ACM cable to the back of the telephone.
4 Put the ACM attached ribbon cable into the track running down theback
of the telephone base.
5 Put the hard plastic cable cover over the ACM ribbon cable.
6 Snap the ACM plastic cable cover into place.
7 Place the footstand on the hinges.
8 Swing the footstand back into place.
9 Snap the footstand into a non-movable position.
10 Return the telephone to an upright position.
M3900 Series Telephones Description, Installation and Administration
Page 29 of 36