Post The Len Of The Card To Be Replaced By Typing; Ckt_No; And Pressing The Enter Key; Where Site - Nortel DMS-100 Series Replacement Procedures

Replacing an NT6X18 card in an RSC LCM
At your current location
1 Proceed only if you were either directed to this card replacement procedure
from a step in a maintenance procedure, are using the procedure for verifying
or accepting cards, or were directed to this procedure by your maintenance
support group.
2 Obtain a replacement card. Ensure the replacement card has the same
product equipment code (PEC) including suffix, as the card to be removed.
At the MAP
3

Post the LEN of the card to be replaced by typing

>MAPCI;MTC;LNS;LTP;POST L SITE lcm_no lsg_no ckt_no

and pressing the Enter key.

where
site
is the site name given to the remote location
lcm_no
is the number of the LCM with the faulty card

lsg_no

is the number of the LSG with the faulty card

ckt_no

is the number of the circuit associated with the faulty card

Example of a MAP display:

DMS-100 Family NA100 Card Replacement Procedures Volume 4 of 7 LET0015 and up
XPM card replacement procedures
in an RSC LCM
1-761
NT6X18
(continued)