Settings; Measured Values - ABB RELION 630 Series Technical Manual

1MRS757256 F
7.7.6
Table 320: NPMMXU Non group settings (advanced)
Name Values (Range)
Grid1 connectivity
Grid2 connectivity
Ov Curr Trg interval
Extended LS sharing
Disable test request
7.7.7
PML630/Compact Load-Shedding Solution
Technical Manual
Table 319: NPMMXU Output signals
Name
NW_SOURCE
NW_PPLS1
NW_PPLS2
AVA_POW_SRC1
ACT_POW_SRC1
AVA_POW_SRC2
ACT_POW_SRC2
TEST_REQUEST
CONFIG_ERROR

Settings

Unit
External source -
Peer substation
External source -
Peer substation
0.00 - 3.00 s
Half Half -
Zero full
Full zero
No -
Yes

Measured values

Table 321: NPMMXU Measured values
Name
SLS_TRG_INH
PPLS1_DATA
PPLS1_QVAL
PPLS1_TEST
PPLS2_DATA
Table continues on next page
Power management functions
Type Description
GROUP SIGNAL Group signal of network power sources
GROUP SIGNAL GrGroup signal of electrical area connected with
power source1
GROUP SIGNAL Group signal of electrical area connected with
power source2
REAL Available power of power source1
REAL Active power of source1
REAL Available power of power source2
REAL Active power of power source2
BOOLEAN Test request for the IED due to peer PML IED in test
mode
BOOLEAN Incorrect configuration of power source1 or power
source2
Step Default
- External source
- External source
0.01 0.00
- Half Half
- No
Type Default Description
BOOLEAN 0 Slow load shed trigger inhibit
INTEGER 0 LS data of electrical area connected with power
source1
BOOLEAN 0 Data quality of electrical area connected with
power source1
BOOLEAN 0 Electrical area PML test mode connected with
power source1
INTEGER 0 LS data of electrical area connected with power
source2
Section 7
Description
Source1 connectivity configuration with
Grid1
Source1 connectivity configuration with
Grid2
Time interval for over current based slow
load trigger
Extended load shed sharing for peer
substations
Disable test request for PML test mode
275