Section 3
Basic functions
3.32.2.2
3.32.2.3
162
INVERTERQT function block
Function block
INVERTERQT
INPUT
IEC09000299-1-en.vsd
IEC09000299 V1 EN
Figure 98:
Function block
Signals
Table 172:
INVERTERQT Input signals
Name
Type
INPUT
BOOLEAN
Table 173:
INVERTERQT Output signals
Name
Type
OUT
BOOLEAN
Settings
The function does not have any parameters available in LHMI or PCM600.
Pulse timer function block PULSTIMERQT
Function block
PULSETIMERQT
INPUT
IEC09000304-1-en.vsd
IEC09000304 V1 EN
Figure 99:
Function block
Functionality
Pulse timer function block (PULSETIMERQT) can be used, for example, for pulse
extensions or limiting of operation of outputs. The pulse timer has a settable length
and also propagates quality and time.
When the input goes to 1 the output is 1 for the time set by the time delay parameter t.
Then return to 0.
When the output changes value, the timestamp of the output signal is updated.
The supported "quality" state bits are propagated from the input each execution to the
output. A change of these bits does not lead to an updated timestamp on the output.
OUT
Default
Description
0
Input signal
Description
Output signal
OUT
1MRS757256 F
PML630/Compact Load-Shedding Solution
Technical Manual