3.1.6
Scaler parameter
This submenu is used to set the parameters for scaler measure-
ments. Preset TimeMode is used to measure a defined time. Pre-
set CntMode is used to measure a defined number of counts. With
"Auto restart" the RadEye B20 restarts automatically the meas-
urement. "Set Time/Count" edit the preset time and count. "Ac-
cum. Counts" means the RadEye displays the accumulated counts
instead of the mean value. This option is only effective with
measuring units "cps" or "cpm".
3.1.7
Nuclide table
The submenu Nuclide table is only available in activity mode
(Bq, dps, dpm, Bq/cm
3.1.8
Settings
3-10
2
). A "" show the selected nuclide.
DB-065 E
RadEye B20/-ER
Iw/Tr/Ff 06.03.2017