Troubleshooting With Error Codes; Error Log & Cpa Event Log; About - Precor TRM700-16 Base Service Manual

The error code description
l
The affected system components
l
The Issues and Symptom information
l
Troubleshooting and repair information
l

Troubleshooting with Error Codes

Getting Started
You will need a copy of the " Error Code Troubleshooting Guide " to learn Information about the
error codes including the code description, related issues/symptoms, troubleshooting and
repair information, click
Using Error Codes to troubleshoot
1. Access the service software Error Log or CPA Event Log (see
Log" on page 145) to view any current and past error code events.
2. Go to the Error Code Troubleshooting
Troubleshooting information
Error Log & CPA Event Log

About

On P10, P20, and P30 consoles, service error codes are viewed on the Error Log menu. On
P62, P80, and P82 consoles, service error codes are viewed on the
IMPORTANT: On P62, P80, and P82 consoles, use the CPA Event Log and not the
Event Log for viewing machine troubleshooting error codes. The CPA Event Log filters
out non-related error codes and only shows error codes related to machine failure
issues.
Always review the Error Log or CPA Event Log when troubleshooting an issue. The error logs
will contain any triggered error code events and related information. You can then refer to
Error Code Troubleshooting Guide
tomer service for assistance, refer to the Error Log or CPA Event Log for additional inform-
ation to help the representative resolve the issue.
Note: Be aware that not all machine failures will cause an error code event. Use phys-
ical observation and mechanical troubleshooting skills to resolve non error code
issues.
Error event codes are sequentially stored as a table in memory in a First-In Last-Out basis, the
newest error code is stored in the number one position pushing any current error codes down
one position. When the memory is full, the oldest error code is pushed off the stack and
removed from memory.
1
Control Processing Assembly
Experience Series 700 Line Treadmills
Error Code Troubleshooting
to help resolve the issue. Also, when calling Precor cus-
Guide.
Guide, look up the error code and follow the
6 Troubleshooting
"Error Log & CPA Event
1
CPA Event Log menu.
141