Air Filters Of Control Cabinet; Replacing The Hmi Battery - Danfoss VACON 1000 Operating Manual

VACON® 1000
Operating Guide
A Screws
B Filter cover
2.
Remove the air filter cover and remove the old filter.
3. Install a new air filter in place of the old one.
4.
Reinstall the filter cover and tighten the screws.
5. Note the filter replacement date.

9.4.3 Air Filters of Control Cabinet

Procedure
1. Press the button and pull back the top part of the filter cover.
Illustration 73: Releasing the Filter Cover
1 Filter cover
2 Air filter
2.
Remove the air filter cover.
3. Remove the filter and replace it with a new one.
4.
Reinstall the filter cover.
5. Note the filter replacement date.

9.5 Replacing the HMI Battery

Procedure
1. Remove the screws at the back side of the HMI.
A
Illustration 74: Locations of the HMI Cover Mounting Screws
A Cover mounting screws
84 | Danfoss A/S © 2021.06
C Air filter
2
1
A
AQ363633621020en-000201 / 172F3117
Maintenance