Table of Contents
Advertisement
VACON® 1000
Operating Guide
Illustration 38: Angle Steel
5.2.2 Mounting the Cabinets
Connect and fix the round hole on each channel steel base with the trench channel steel. Use M12×35 screws. The cabinet can also
be welded to the channel steel base.
Illustration 39: Mounting the Cabinets to the Foundation
5.3 Installing the Power Cells
At least two persons are required for cooperation during the installation.
A power cell lifting cart is available from Danfoss as an option.
1.
Once the power cell is removed from the package, make sure that it is not damaged.
2.
Use the power cell lifting cart or other lifting device to move and lift the power cell.
The lifting device must:
•
Be able to lift the weight of the power cells.
•
Be able to lift the power cells to the required height.
•
Have a locking mechanism.
3.
Push the power cell completely into the fixing support slot in the cabinet.
44 | Danfoss A/S © 2021.06
Mechanical Installation
AQ363633621020en-000201 / 172F3117
Advertisement
Table of Contents
