Danfoss VACON 1000 Operating Manual page 138

VACON® 1000
Operating Guide
Standard number Standard Name
IEC 60146-1-3:1991 Semiconductor convertors – General requirements and line commutated convertors – Part 1-3: Trans-
formers and reactors
IEC 60146-2:1999 Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c.
converters
IEC 60204-11:2000 Safety of machinery – Electrical equipment of machines – Part 11: Requirements for HV equipment for
voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV
Degrees of protection provided by enclosures (IP Code)
IEC 60529:1989
+AMD1:1999
+AMD2:2013 CSV
IEC 60721-3-1:1997 Classification of environmental conditions – Part 3 Classification of groups of environmental parame-
ters and their severities – Section 1: Storage
IEC 60721-3-2:1997 Classification of environmental conditions – Part 3: Classification of groups of environmental parame-
ters and their severities – Section 2: transportation vibration random, free fall and shock-packaged
Classification of environmental conditions – Part 3-3: Classification of groups of environmental param-
IEC 60721-3-3:1994
eters and their severities – Stationary use at weather protected locations
+AMD1:1995
+AMD2:1996 CSV
IEC 60757:1983 Code for designation of colors
Low-voltage switchgear and controlgear – Part 5-5: Control circuit devices and switching elements –
IEC 60947-5-5:1997
Electrical emergency stop device with mechanical latching function
+AMD1:2005
+AMD2:2016 CSV
IEC 60076-1 Power transformers - Part 1: General
IEC 60076-11 Power transformers - Part 11: Dry-type transformers
IEC 60076-12 Power transformers - Part 12: Loading guide for dry-type power transformers
IEC 60076-2 Power transformers - Part 2: Temperature rise
IEC 60076-3 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
IEC 61378-1:2011 Converter transformers – Part 1: Transformers for industrial applications
IEC 61378-3:2015 Converter transformers – Part 3: Application guide
UL 1562 Transformers, Distribution, Dry-Type – Over 600 Volts
C57.12.01-2015 General Requirements for Dry-Type Distribution and Power Transformers
C57.12.60-2009 Test Procedure for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distribution
Transformers, Including Open-Wound, Solid-Cast, and Resin-Encapsulated Transformers
C57.12.91-2011 IEEE Standard Test Code for Dry-Type Distribution and Power Transformers
C57.12.58-2017 Draft Guide for Conducting a Transient Voltage Analysis of a Dry-Type Transformer Coil
C57.124-1991 Detection of Partial Discharge and the Measurement of Apparent Charge in Dry-Type Transformers.
IEC 60721-3-1 Classification of environmental conditions - Part 3 Classification of groups of environmental parame-
ters and their severities - Section 1: Storage
IEC 60721-3-2 Classification of environmental conditions - Part 3: Classification of groups of environmental parame-
ters and their severities - Section 2: Transportation
138 | Danfoss A/S © 2021.06
Specifications
AQ363633621020en-000201 / 172F3117