Danfoss VACON 1000 Operating Manual page 11

VACON® 1000
Operating Guide
DAMAGE TO THE AC DRIVE FROM INCORRECT SPARE PARTS
Using spare parts that are not from the manufacturer can damage the drive.
-
Do not use spare parts that are not from the manufacturer.
DAMAGE TO THE AC DRIVE FROM CHANGES TO DRIVE COMPONENTS
Doing electrical or mechanical changes to the drive components can cause malfunctions and can damage the AC Drive.
-
Do not make electrical or mechanical changes to the drive components.
DAMAGE TO THE AC DRIVE FROM INSUFFICIENT GROUNDING
Not using a grounding conductor can damage the drive.
-
Always ground the AC drive with a grounding conductor that is connected to the grounding terminal that is identified with
the PE symbol.
DAMAGE TO THE AC DRIVE DUE TO DISCONNECTED CONTROL POWER
Disconnecting the control auxiliary power when the AC drive is connected to mains or when the power indicator is on can cause
abnormalities in the function of the power cells and damage the cells.
-
Do not disconnect the control auxiliary power supply when the AC drive is connected to mains or if the power indicator is
on.
CUT HAZARD FROM SHARP EDGES
There can be sharp edges in the AC drive that can cause cuts.
-
Wear protective gloves when mounting, cabling, or doing maintenance operations.
BURN HAZARD FROM HOT SURFACES
Touching surfaces, which are marked with the 'hot surface' sticker, can result in injury.
-
Do not touch surfaces which are marked with the 'hot surface' sticker.
DAMAGE TO THE AC DRIVE FROM STATIC VOLTAGE
Some of the electronic components inside the AC drive are sensitive to ESD. Static voltage can damage the components.
-
Use ESD protection when working with electronic components of the AC drive. Do not touch the components on the circuit
boards without proper ESD protection.
DAMAGE TO THE AC DRIVE FROM INCORRECT EMC LEVEL
The EMC level requirements for the AC drive depend on the installation environment. An incorrect EMC level can damage the
drive.
-
Before connecting the AC drive to the mains, make sure that the EMC level of the AC drive is correct for the mains.
Danfoss A/S © 2021.06
C A U T I O N
C A U T I O N
C A U T I O N
C A U T I O N
C A U T I O N
C A U T I O N
N O T I C E
N O T I C E
AQ363633621020en-000201 / 172F3117 | 11
Safety