Power Cable Termination; Control Cable Entry - Danfoss VACON 1000 Operating Manual

VACON® 1000
Operating Guide
Illustration 47: Bottom Entry (Left) and Top Entry (Right)
A Input busbar
B Output busbar
C Insulation barrier and supporting bracket

6.5.3 Power Cable Termination

Wiring kits including the recommended lugs, bolts, washers, and nuts are provided and delivered with cabinets.
Connect the lugs to the power cables and mount them to the input and output terminals with the parts included in the wiring kits.

6.5.4 Control Cable Entry

Both bottom entry and top entry are possible to the control cabinet. No modifications are required.
Once cable routing is finished, tie the control cables on the wire duct/bracket.
Danfoss A/S © 2021.06
A
B
C
D
E
E
C
D
B
A
D Cable clamp and supporting bracket
E Clamp for three-core cable and supporting bracket
AQ363633621020en-000201 / 172F3117 | 51
Electrical Installation