GRAPHTEC CE6000-120AP User Manual page 79

5
Press the POSITION (
the settng value.
6
Confirm the settings and press the POSITION ( ) key
(PREVIOUS).
The baud rate s selected and t wll return to RS-232C settng screen.
7
Press [2] key (DATA BIT).
DATA BIT settng screen s dsplayed.
8
Press [1] key (8 BIT) or [2] key (7 BIT).
Data length s set, and t wll return to RS-232C settng screen.
9
Press [3] key (PARITY).
PARITY settng screen s dsplayed.
10
Press [1] key (NONE), [2] key (EVEN), or [3] key (ODD).
The party s selected and t wll return to RS-232C settng screen.
11
Press [4] key (HANDSHAKE).
HANDWIRE settng screen s dsplayed.
) keys and ncrease or decrease
2-50
Supplement
Match t to the software you are usng.
Supplement
Match t to the software you are usng.
Press the POSITION ( ) key (PREVIOUS) to
return to the RS-232C settng screen wthout
changng any settngs.
Supplement
Match t to the software you are usng.
Press the POSITION ( ) key (PREVIOUS) to
return to the RS-232C settng screen wthout
changng any settngs.