Stop Function - GRAPHTEC CE5000-60 User Manual

When it is necessary to both move the origin and rotate the coordinate axes, be sure to rotate the coordi-
nate axes first.
CHECKPOINT After a new origin point is set, the displayed coordinate values of X= and Y= repre-
sent the respective distances from the new origin.
3.7

Stop Function

Cutting or plotting can be stopped by pressing the
Raising or lowering the media set lever while the cutting or plotting is stopped does not require the medium
to be selected, so the medium can be replaced or reset.
If the Special Function "PAUSE KEY" is set to "HOLD"
1
Step
Press the (PAUSE) key while cutting or plotting is in progress to stop cutting or plotting and display the
PAUSE menu.
C O N T I N U E J O B
2
Step
Press the (NEXT) or
"QUIT JOB".
C O N T I N U E J O B
Q U I T J O B
3
Step
Pressing the (ENTER) key key while "CONTINUE JOB" is displayed cancels the pause function and
restarts cutting or plotting.
4
Step
Pressing the (ENTER) key while "QUIT JOB" is displayed displays the BUFFER CLEAR confirmation
screen for aborting the cutting/plotting operation.
C L E A R < Y E S >
5
Step
Press the or key to alternate the display between "YES" or "NO". To abort the cutting/plotting
operation, stop the transmission of data from the computer, select "YES", and then press the
key. All the cutting/plotting data stored in the buffer is cleared and the plotter returns to Ready status.
To cancel the aborting of the cutting/plotting operation, select "NO" and then press the
The plotter returns to the "CONTINUE JOB" display.
(PREV.) key key to alternate the display between "CONTINUE JOB" and
3 – 11
(PAUSE) key while cutting or plotting is in progress.
(ENTER)
(ENTER) key.