MovNg The Pen WhLe RaSed Or Lowered N Response To The 'W' Command (Command 'W') - GRAPHTEC CE6000-120AP User Manual

Moving the Pen While Raised or Lowered in Response to the 'W' Command (COMMAND 'W')
Here, you can change the settngs for the 'W' command, whch s a GP-GL arc cuttng command.
Ths functon set the operaton upon recept of the 'W' command for the drawng of arcs.
The pen will move to the specified starting position in the raised status when it is set to TOOL UP, regardless of
the pen's conditions. The pen will move without changing its condition, to the specified starting position in the
lowered status when t s set to TOOL DOWN.
Supplement
Ths only has an effect on the cutter tool.
Operation
1
Press the [PAUSE/MENU] key n the default screen.
MENU screen s dsplayed.
2
Press the POSITION ( ) key (I/F).
INTERFACE settng screen (1/3) s dsplayed.
3
Press the POSITION ( ) key.
INTERFACE settng screen (3/3) s dsplayed.
4
Press the [3] key (COMMAND 'W').
COMMAND 'W' settng screen s dsplayed.
5
Press the [1] key (TOOL DOWN) or the [2] key (TOOL UP).
6
Confirm the setting and press the [ENTER] key (SET).
Settng wll be set, and t wll return to INTERFACE settng screen (3/3).
7
Press the [PAUSE/MENU] key.
It wll return to the default screen.
Supplement
Perform the settngs n Normal menu.
10-6