GRAPHTEC CE6000-120AP User Manual page 65

Setting the Acceleration
Set the acceleraton of the tool that s used n each of the tool condton numbers.
Settng range: 1 to 2
Operation
1
Press the [COND/TEST] key n the default screen.
CONDITION settng screen (1/3) s dsplayed.
2
Press the POSITION ( ) key.
CONDITION settng screen (2/3) s dsplayed.
3
Press the [1] key (ACCELERATION).
ACCEL settng screen s dsplayed.
* Dsplay may vary dependng on the selected tool condton number.
4
Press the POSITION (
number (CONDITION No.).
5
Press the POSITION (
settng value.
6
Confirm the setting and press the [ENTER] key (SET).
Settng wll be set, and t wll return to CONDITION screen (2/3).
7
Press the [COND/TEST] key.
It wll return to default screen.
) key and select the tool condton
) key and ncrease or decrease the
2-36
Supplement
Please select Condton No.1 under "Selectng
the Tool Condtons" when settng up tool
condtons for the pen plunger, and select from
Condton No.2 to Condton No.8 when settng
up the tool condtons for the cutter plunger.
For more nformaton, see "2.10 Selectng Tool
Condton" .
P.2-29
Supplement
It wll return to CONDITION screen (2/3)
wthout changng the settngs when you press
the [4] key (CANCEL) .
Supplement
Gudelne to set acceleraton
See "Settng the Tool Condton" .
P.2-30