GRAPHTEC CE6000-120AP User Manual page 94

Stop Cutting
Operation
1
Press the [PAUSE/MENU] key.
Operaton wll stop and followng screen s dsplayed.
2
Press the [2] key (QUIT JOB).
Followng screen s dsplayed.
3
Confirm if the data transfer from the computer is stopped and
press the [1] key (YES, CLEAR).
Followng screen s dsplayed, the buffer memory s cleared, and t wll
return to default screen.
Supplement
It wll resume cuttng by pressng [1]
(CONTINUE JOB) key.
See "Pause and Resume Cuttng"
Supplement
It wll return to operaton stop screen
wthout clearng buffer memory when [2] key
(CANCEL) s pressed.
In the case that the operaton s nterrupted
and the buffer s cleared, make sure that the
data transfer s stopped.
If the data transfer contnues, abnormal
operatons where data s processed from the
mddle may occur.
3-13
.
P.3-12