GRAPHTEC CE6000-120AP User Manual page 145

7.1
Sorting the Cutting Data
Sorting the cutting area parameter data will increase cut efficiency by minimizing time spent by changing tools
and by groupng cuttngs to happen all at once.
Frst plot the data from the pen plunger (Condton No.1), then plot (cut) the cutter plunger (Condton No.2 through
No.8).
Supplement
Sortng wll start the process after all the data are stored n the buffer memory, so t takes tme to start the cuttng.
Sorting might not be effective for the data that is created efficiently.
Process may be faster to turn off the sortng on the plotter, f the data s already sorted usng the software on the PC.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen s dsplayed.
2
Press the [1] key (TOOL).
TOOLS SETTING screen (1/3) s dsplayed.
3
Press the POSITION ( ) key.
TOOLS SETTING screen (2/3) s dsplayed.
4
Press the [2] key (DATA SORTING).
DATA SORTING settng screen s dsplayed.
5
Press the [1] key (ON) or the [2] key (OFF).
Supplement
Perform the settngs n Normal menu.
7-2