GRAPHTEC CE6000-120AP User Manual page 178

Priority of Tool Condition Selection (CONDITION PRIORITY)
Select the prorty of the settng created by dfferent method when the tool condton s set.
All the tool condton that s receved from the computer wll be gnored, and only the settng and change of the
tool condton from the control panel s accepted when MANUAL s selected. Ths settng set here s mantaned
even f the power s turned off.
On the other hand, t wll set the most current tool condton ether from the control panel or from the software
when PROGRAM s selected. The values set from the control panel s mantaned, and the values set from the
software s erased when the power s turned off.
Operation
1
Press the [PAUSE/MENU] key n the default screen.
MENU screen s dsplayed.
2
Press the [1] key (TOOL).
TOOLS SETTING screen (1/3) s dsplayed.
3
Press the POSITION ( ) key.
TOOLS SETTING screen (2/3) s dsplayed.
4
Press the [4] key (CONDITION PRIORITY).
CONDITION PRIORITY settng screen s dsplayed.
5
Press the [1] key (MANUAL) or the [2] key (PROGRAM).
6
Confirm the setting and press the [ENTER] key (SET).
Settng wll be set, and t wll return to TOOLS SETTING screen (2/3).
7
Press the [PAUSE/MENU] key.
It wll return to the default screen.
Supplement
Perform the settngs n Normal menu.
10-3