GRAPHTEC CE6000-120AP User Manual page 11

To use a media wider than 1,119 mm
When using the left grit roller, set the push roller to the position of 2 mm from the right edge (A in the figure
below).
Depending on the media size, adjust the position of the push roller of the long right grit roller.
Notes on the left grit roller
The left grt roller s not avalable n all locatons.
It's not possible to set the right edge of the grit roller to a size greater than 8 mm. (There is a stopper.)
Please set the push roller to the poston between 2 mm and 8 mm from the rght edge of the grt roller.
OK
Notes on the crosscut
When settng the push roller to the left grt roller, the length of the crosscut wll be as follows.
Please note the poston you want to set the meda.
• When the poston to set the push roller s 2 mm to 4 mm or less from the rght edge of the grt roller, the
crosscut from the left edge of the push roller wll be 15 mm.
• When the poston to set the push roller s 4 mm or more to 8 mm from the rght-sde of the grt roller, the
crosscut from the left-sde of the push roller s 10 mm.
Grt roller (Left)
2mm
(A)
Push roller
Grt roller
Meda
2 mm to 8 mm
15 mm
10 mm
Push roller
Meda
Grt roller (Rght-sde longer)
NG
Push roller
Grt roller
Meda
2 mm to 4 mm or less
Push roller
Grt roller
Meda
4 mm or more to 8 mm
VI
Adjust
Push roller
Grt roller
Meda
8 mm or more