GRAPHTEC CE6000-120AP User Manual page 37

Determine the desired position, and then tighten the flange screw.
Set the position measurement for the media flange as per the
followng gudelnes n when usng paper wth a wdth of 1200 mm.
If using paper of a different width loosens the flange screw, adjust
the position of the grit roller, then re-tighten the flange screw.
Meda
Media flange
Flange
screw
Approx. 100 mm
2
Lowerng the lever releases the stopper lock.
3
Set the stock shaft n from the front.
Groove
Stock shaft
Grooved porton of the components should
be set so that the grooves contact the
recevng end of the roller.
Lever
2-8