Chapter 7: Settings Regarding Cutting Time; SortNg The CuttNg Data - GRAPHTEC CE6000-120AP User Manual

Chapter 7:
Settings Regarding Cutting Time
Time necessary for cutting depends on the speed to move the tool and media, and efficiency of the operation.
It s best to cut slowly and carefully to cut precsely, but the speed s requred to enhance the operatonal
efficiency. The setting needs to be in good balance considering the characteristics of the media and tools,
and the contents of the cuttng data.
Ths chapter descrbes the settngs affectng the cuttng tme.
In addton to ths chapter, there are settng affectng the cuttng tmes n followng places.
P.2-30 Settng the Tool Condton
PRODUCT SUMMARY
7.1 Sorting the Cutting Data
7.2 Perform Automatic Pre Feed When Cut Data is
Received
7.3 Perform Automatic Pre Feed When Media is Set
(Initial Feed)
7.4 Setting Feed Speed for Pre Feed
7.5 Setting the Tool Up Speed
7.6 Setting the Tool Up Move
7-1