GRAPHTEC CE6000-120AP User Manual page 5

Do not attempt to lubricate the cutting-plotter
mechanisms.
•
Such acton may cause t to break down.
Prohibited
Provide sufficient space around the plotter so that
it does not strike any objects in its vicinity during
cutting.
•
Such contact may cause msalgnment n cuttng or plottng.
No touching
When using the cutter, take care not to extend the
blade more than necessary.
•
An overly extended blade wll damage the cuttng mat and
adversely affect the cuttng qualty.
Do not place the plotter on an incline, areas subject
to many vibrations, or other unstable locations.
•
If the plotter falls, t may sustan damage.
Prohibited
Run a test cut when cutting media with unknown
condition settings.
•
Runnng a cut operaton wth ncorrect settng values may
cause a large overload to the blades and devce or a system
breakdown.
Safety Precautions
CAUTION
Do not clean the plotter using volatile solvents such
as thinner or benzene.
•
Such acton may mpar ts performance.
When using indoor lighting such as fluorescent or
other electrical lamps, provide a distance of at least
one meter between the plotter and the light source.
•
Move the tool carriage slowly when moving it
manually in order to load the medium or for other
reasons.
•
Movng t quckly may damage the plotter.
Do not place magnetic cards, diskettes or similar
items in the vicinity of the tool carriage.
•
The magnetc force may destroy the data on the magnetc
cards or dskettes.
v
Prohibited
Close proxmty of such a lght source may cause the sensor
to malfunction and prevent proper size detection of the media.
Prohibited