ChangNg And SavNg The Rs-232C Nterface SettNgs - GRAPHTEC CE6000-120AP User Manual

2.13.4 Setting RS-232C interface (Simple menu)
When using the RS-232C interface, set the command settings, step size settings (when using GP-GL
commands), orgn pont settngs for HP-GL (when usng HP-GL commands), and transfer condtons for the RS-
232C nterface.
In Normal menu, set the command settings, step size settings (when using GP-GL commands), origin point
settngs for HP-GL (when usng HP-GL commands). (
the Step Size",
P.3-9
The transfer condton for RS-232C nterface can be set from the control panel. The transfer condton should be
set to the same n the software used and n the CE6000-120AP. If there s a mstake n the settngs an error may
display in the machine and lack of data can cause a malfunction. In such a case, please confirm the transfer
condton settngs agan.
Changing and saving the RS-232C interface settings
Operation
1
In default screen, press [PAUSE/MENU] key.
MENU screen s dsplayed.
2
Press [2] key (I/F).
INTERFACE screen s dsplayed.
3
Press [2] key (RS-232C).
RS-232C screen s dsplayed.
4
Press [1] key (BAUD RATE).
"Settng Orgn Pont When HP-GL s Set")
P.10-2 "Settng the Command",
Supplement
Press the POSITION ( ) key (CANCEL) to
return to the INTERFACE settng screen
wthout changng any settngs.
Supplement
Baud rate can be set to 19200, 9600, 4800,
2400, 1200, 600, or 300.
2-49
P.10-4 "Settng