GRAPHTEC CE6000-120AP User Manual page 163

13
Press the [1] key (HARDWIRE), the [2] key (Xon/off), or the [3]
key (Enq/Ack).
HANDSHAKE wll be selected, and t wll return to RS-232C settng
screen.
14
Confirm the setting and press the [ENTER] key (SET).
Settng wll be set, and t wll return to INTERFACE settng screen.
15
Press the [PAUSE/MENU] key.
It wll return to default screen.
Supplement
Match the settng value of the applcaton to
be used.
It wll return to RS-232C settng screen
wthout changng the settngs when you
press POSITION ( ) key (PREVIOUS).
Enq/Ack settng s vald only when t s set to
HP-GL. It wll be set to HARDWIRE even f
Enq/Ack s selected when t s set to GP-GL.
8-7