GRAPHTEC CE6000-120AP User Manual page 62

5
Confirm the setting and press the POSITION ( ) key
(PREVIOUS) .
CONDITION No. wll get set and return to TOOL settng screen.
6
Press the POSITION (
7
Press the [3] key (OFFSET).
OFFSET settng screen s dsplayed.
8
Press the POSITION (
settng value.
9
Confirm the setting and press the [ENTER] key (SET).
Settng wll be set, and t wll return to CONDITION screen (1/3).
10
Press the [COND/TEST] key.
It wll return to default screen.
) key, and set the tool.
) key and ncrease or decrease the
2-33
Supplement
It wll return to CONDITION screen wthout
changng the settngs when you press the
POSITION ( ) key (CANCEL) .
Supplement
What s Offset
It wll adjust the dfference between the tp
of the blade n the plunger and the center of
the plunger. There are standard adjustment
values for each cutter blades. Fne
adjustment wll be made to that standard
values here. (Adjustment wll be made wth
standard value as 0.)
It s not necessary to set the offset f "PEN",
was selected n the tool settngs. (not
dsplayed)
Gudelne to Set Offset
Refer to the Cutter Blade Manual.
To return to contnue the settngs of other
tool condton number, return to step 3 by
pressng the [1] key.