GRAPHTEC CE6000-120AP User Manual page 3

Do not touch the moving parts such as rollers and
tool carriage while cutting or plotting is in progress.
•
Such acton may result n njury.
No touching
Keep your hands, hair, etc., away from the rollers or
moving parts such as the carriage even if the plotter is
stopped, as it may suddenly start moving when data is
received.
•
Such acton may result n njury.
No touching
Do not connect the plotter to a non-rated power
supply.
•
Such action may cause electric shock or a fire hazard due to
current leakage.
Prohibited
If the plotter generates smoke, overheats, emits a
strange odor, or otherwise functions abnormally, do
not continue using it. Turn off the power and unplug
the power cord from the electrical socket.
•
Use of the plotter in such a condition may result in a fire
hazard or electric shock.
•
After confirming that smoke is no longer being emitted,
contact your sales representatve or nearest Graphtec vendor
for repars.
•
Never attempt to perform repars yourself.
Repar work by nexperenced
personnel s extremely dangerous.
Prohibited
Safety Precautions
WARNING
Be sure to ground the earth terminal.
•
If the plotter s not grounded, the operator could suffer an
electrc shock n the event of current leakage.
Ground the Plotter
Do not disassemble, repair, or remodel the plotter.
•
Such action may cause electric shock or a fire hazard due to
current leakage.
•
Contact wth the hgh-voltage parts wthn the plotter may
cause electrc shock.
•
If the plotter requres repars, contact your sales
representatve or nearest Graphtec vendor.
No disassembly
Do not use the plotter in a location where it will be
exposed to water, rain, or snow.
•
Such action may cause electric shock or a fire hazard due to
current leakage.
Do not allow dust or metal scraps to adhere to the
power plug.
•
Such action may cause electric shock or a fire hazard due to
current leakage.

Avoid water
Beware of
electrical shock
Prohibited
Beware of
electrical shock