GRAPHTEC CE6000-120AP User Manual page 106

Operation
1
Create one data you want to copy.
Cuttng data s stored n the buffer memory.
2
Press the POSITION (
to the poston to copy.
3
Press the [COPY] key.
COPY MODE screen s dsplayed.
4
Press the [1] key (MEDIA CHANGE MODE).
MEDIA CHANGE MODE settng screen s dsplayed.
5
Press the [1] key (OFF).
Confrm the settngs and return to the COPY MODE screen.
6
Press the [2] key (NUMBER OF COPIES).
NUMBER OF COPIES settng screen s dsplayed.
7
Press the POSITION (
settng value.
8
Confirm the setting and press the POSITION ( ) key
(PREVIOUS).
Number of copes wll be selected, and t wll return to COPY mode
screen.
) key and move the tool carrage
) key and ncrease or decrease the
4-12
Supplement
When settng the copy nterval, set "MEDIA
CHANGE MODE" to OFF.
"NO DATA FOR COPY IN BUFFER!" s
dsplayed f there s no data n the buffer
memory. Send the cuttng data.
If too much data s sent from the buffer
memory, "1 copy n the Copy mode buffer!"
wll be dsplayed.
If the data to be coped s larger than the
cuttng area, "Cannot copy, the vald area s
too small" wll be dsplayed.
Supplement
Number of copes can be set from 1 to 100,
as much as it can fit in the media set on the
prnter.
The ntal value for the number of copes s
always 1.
Supplement
"CANNOT COPY CUT AREA TOO SMALL!" s
dsplayed f the cuttng area s smaller than the
copy data. Ether expand the cuttng area, or
set the meda that s bg enough to copy.