GRAPHTEC CE6000-120AP User Manual page 202

6
Press the [1] key (DONE 1/2) or the [2] key (DONE 2/2).
Message to confirm tool position is displayed.
7
Move the tool carrage to prnt start poston by pressng the
POSITION (
8
Confirm that movable parts of the tool and media can safely
operate and press the [ENTER] key.
Selected page of the CONDITION LIST s prnted.
9
It wll return to READY status when the prntng s completed.
10
Press the [PAUSE/MENU] key.
It wll return to READY status when the prntng s completed.
) key.
Supplement
Press the [3] key (CANCEL CONDITION)
to return to the TEST menu screen wthout
prntng the lst.
Do not place you hand around the movng
areas. The tool carrage wll start movng, so
there s a chance of njury.
Supplement
Set the meda and repeat steps 6 to 8 to prnt
dfferent page at ths pont.
12-14
CAUTION