Options - Micromeritics AccuPyc II 1340 Operator's Manual

Equipment Description
Glove Box
A glove box unit for analysis of samples in which a controlled environment is required is available in
the following configurations:
3
• 1-cm
• 10-cm
• 100-cm
• 350-cm
• 2000-cm
This unit consists of two separate modules. The controller is placed outside the glove box, while the
analysis module is placed inside the glove box. Up to six analysis modules may be placed in the glove
box, all controlled by one external control module.
If you have an existing AccuPyc, you can order the glove box analysis unit containing the desired sam-
ple chamber and simply connect it to the connector provided on the rear panel of the existing AccuPyc.
You would not have to order a controller in this case.

Options

High-Pressure Core Pycnometer
Gas pycnometry is recognized as one of the most reliable techniques for obtaining skeletal volume and
density. The AccuPyc High-Pressure pycnometer is a fully automatic pycnometer that provides high-
speed, high-precision volume measurements and density determinations on intact or crushed shale core
samples.
The high-pressure core pycnometer:
• Operates at a high pressure of 500 psi to provide a better diffusion of the gas into the
rock.
• Has a stainless steel sample chamber with a volume of 100 cm
• Has a sample chamber that can accommodate a 48 mm (1.85 in.) diameter core of up
to 60 mm (2.40 in.) in length.
1-6
sample chamber
3
sample chamber
3
sample chamber
3
sample chamber
3
sample chamber
AccuPyc II 1340
3
.
Aug 2013