Micromeritics AccuPyc II 1340 Operator's Manual page 41

AccuPyc II 1340
Function
Set Up
Transmit
Escape
Analyze
Review
Print
Unit
Aug 2013
Key(s)
Alt + 2
Alt + 3
Alt + CLEAR
Alt + 4
Alt + 5
Alt + 6
Alt + CHOICE + [unit
number]
Use To (continued)
Display or edit analysis parameters, report
options, calibration data, data transmission
parameters, unit types, operating language,
and date and time.
Transmit analysis or calibration data over
the serial line. Transmit a partial report if an
automatic operation is in progress.
Discard all data entered in the current mode
and return to the Reload prompt.
Cancel an automatic operation if in
progress.
Exit manual mode.
Perform an analysis.
Review completed analysis or calibration
data.
Print an analysis or calibration report. If an
automatic operation is in progress, print a
partial report.
Select the unit you plan to use for the
current operation.
This command is used when multiple
analysis units are attached. For example; if
you have five units attached and you plan to
use unit three for the next analysis, press
; any command you use will
+ CHOICE + 3
apply to unit three.
You can also use the Unit command to view
the progress of an analysis when multiple
units are attached. For example; if you have
analyses in progress on units one, two, and
three; press Alt + CHOICE + 2
status of the analysis on unit two.
Pycnometer Keypad
Alt
to view the
3-7