Review - Micromeritics AccuPyc II 1340 Operator's Manual

System Commands

Review

The Review function enables you to review results of the last operation (analysis or calibration).
Analysis
Press to review or edit analysis results; the following prompts display if requested. You may
Alt + 5
edit the information in the prompts if desired; for example, you may wish to edit the sample mass
when density determinations are requested.
Unit[n] SN1234 10 cm3
X - X - X
Sample ID:
(sample identification)
Unit[n] SN1234 10 cm3
X - X - X
Sample Mass:
(mass)
Unit[n] SN1234 10 cm3
X - X - X
Temperature:
(sample chamber temperature)
Unit[n] SN1234 10 cm3
X - X - X
Start:
(HH:MM:SS) (DD/MM/YY)
Unit[n] SN1234 10 cm3
X - X - X
End:
(HH:MM:SS) (DD/MM/YY)
3-30
Displays the identification entered for the analysis.
Press .
ENTER
Displays the sample mass you entered for the analysis (if
Density was chosen as Analysis display mode).
Press .
ENTER
Displays the sample chamber temperature.
Press .
ENTER
Displays the time and date the analysis began.
Press .
ENTER
Displays the time and date the analysis completed.
Press ENTER .
AccuPyc II 1340
Aug 2013