Micromeritics AccuPyc II 1340 Operator's Manual page 25

AccuPyc II 1340
9. If connecting a printer:
a. Connect one end of the printer cable to a USB connector. Connect the other end to the
input connector on the printer.
b. Press
c. Press
to Report
d. Press
e. Press
to SUPPORTED
f. Press
10. If you have a temperature-controlled AccuPyc, attach the circulating bath (refer to
TEMPERATURE-CONTROLLED
next step.
11. Plug the printer power cord and the pycnometer power cord (which is plugged into the
AC/DC power supply) into an appropriate power source.
June 2013
Alt + 2 to access the Set-up function
until Report Options displays on the fourth line of the display (refer
CHOICE
Options, page 3-14), then press
until the Print Report? prompt displays; press
ENTER
ENTER until the Printer? prompt displays; choose the appropriate printer (refer
PRINTERS, page
to save your selections and return to the Reload prompt.
SAVE
.
ENTER
G-1 for information on supported printers.
ACCUPYC, page F-1) before proceeding with the
Installing the Analyzer
to select Yes.
CHOICE
2-7