Micromeritics AccuPyc II 1340 Operator's Manual page 56

System Commands
Unit Types
These prompts enable you to specify the:
• units of measurement
• operating language
• current date and time
Unit[n] SN1234 10 cm3
Set-up Type?
Unit Types
Unit[n] SN1234 10 cm3
Unit Types
Pressure units?
psig
Unit[n] SN1234 10 cm3
Unit Types
Language?
English
3-22
Press until Unit Types is displayed, then press
CHOICE
.
ENTER
This prompt enables you to choose the units you wish to
display for reports.
Choices: psig (pounds per square inch gauge)
kPag (kilopascal gauge)
Press to select the desired unit, then press
CHOICE
This prompt enables you to choose the operating language.
Choices: English, Deutsch, Español, Francais, Italiano
Once you select a language, the change is effective
immediately; you do not have to press
if you choose Italiano, the next prompt will display in
Italian.
However, any error messages that may be in the message
queue will remain in English (or the current selected
language); they will not be translated. Error messages that
occur after you select the language will display in that
language.
Keypad overlays containing translations for the alternate
functions printed above the keys are available for each
language (refer to ORDERING
1).
Choose the desired language, then press
AccuPyc II 1340
ENTER
. For example;
SAVE
INFORMATION, page
ENTER.
.
6-
Aug 2013