Table of Contents
Advertisement
Maintenance
5.
Grasp the O-ring with the two greased fingers.
6.
With the other hand, pull the O-ring through the greased fingers until the entire O-ring is
greased.
7.
Place the O-ring back into the groove on the cap and, with the greased index finger,
gently press it back into position. After the O-ring is fully seated, grease the groove with
your index finger without applying additional grease.
8.
Replace the chamber cap.
5-6
AccuPyc II 1340
Aug 2013
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the AccuPyc II 1340 and is the answer not in the manual?
Questions and answers